You’ll find GTA 6’s aim assist options under Settings, Gameplay, Combat. The Targeting option picks Lock-On, Partial or Free Aim. Aim Assist Strength sets how much the reticle slows down as it follows a target.
Spoiler note: this guide sticks to menu options and says nothing about the story.

How do you change aim assist in GTA 6?
- Pause and open the Settings menu.
- Select Gameplay, then look for the Combat group.
- Choose Lock-On, Partial or Free Aim under Targeting.
- Set Aim Assist Strength, then turn Shooting Assist, Drive-By Assist and Quick Draw On or Off.
What do the targeting modes do?
| Mode | What it does |
|---|---|
| Lock-On | Snaps to the closest enemy. Picking up a target is easier, but you have less control over which one gets picked first. |
| Partial | Pulls your aim toward a target close by without fully locking on. This is listed as the default. |
| Free Aim | Target selection and shot placement are up to you. You get the most control and do the most manual work. |
One guide recommends settling on a mode before you tune sensitivity, since the right stick behaves differently in each mode. A separate guide covers sensitivity and the response curve.
What is Aim Assist Strength?
It’s a slider, and one guide says it sets how much the reticle slows while it tracks a target. Sources don’t agree on its range. The detailed settings list gives 0 to 4 with 4 as the default, while two other guides give 0 to 5 and name no default. Your own menu will show which is right. Lower numbers give you less help, and every report puts 0 at the bottom of the slider.
What do the other combat assists do?
| Option | Values | Default | Effect |
|---|---|---|---|
| Shooting Assist | Off, On | On | Not described in the guides |
| Drive-By Assist | Off, On | On | Targets nearby enemies when you shoot from a vehicle |
| Quick Draw | Off, On | On | Pressing the aim and fire triggers pulls out your last-used weapons; if two long guns are equipped, it draws the off-hand one |
| Cover Selection | Camera and Movement, Movement Only | not listed | Not described in the guides |
These defaults come from a single settings list for the Xbox version. We couldn’t find a Rockstar page that confirms them.
Why would you change it
- If you have trouble hitting shots during a chase or a firefight, Lock-On or full strength can help.
- Players who’d like to aim unassisted can pair Free Aim with a low strength setting.
- Switching Quick Draw off stops you from drawing a weapon by mistake.
According to another guide, Rockstar warns that some of these settings may affect game balance if you change them.
Related GTA 6 guides
- GTA 6 Aim and Look Sensitivity: Response Curve Settings
- GTA 6 Combat: Aiming, Takedowns, Cover and Stealth Explained
- GTA 6 Difficulty Settings: Is There an Easy Mode?
- GTA 6 Focus Ability: How It Works in Combat
- GTA 6 Controls on PS5 and Xbox: Full Button Layout
Last checked 21 November 2026. We’ll update this page when new details come out.
FAQ
Where is aim assist in GTA 6?
It’s under Settings, Gameplay, Combat. Both Targeting and Aim Assist Strength sit in that group.
What are the targeting modes?
There are three: Lock-On, Partial and Free Aim. Partial is the listed default.
What is the Aim Assist Strength range?
It depends on the report. One list gives 0 to 4 with a default of 4, while two guides give 0 to 5.
Can I turn off aim assist completely?
The closest option is Free Aim with Aim Assist Strength at 0. The guides don’t say whether that removes every form of assistance.
What does Quick Draw do?
It makes the aim and fire triggers pull out your last-used weapons. If two long guns are equipped, it draws the off-hand weapon.



















STAY ALWAYS UP TO DATE