You’ll find the sensitivity options under Aim and Look Sensitivity in the Controller settings. According to an options list published in launch week, the vertical look slider runs from 0 to 14 and starts at 7, and the same list puts every other sensitivity slider at a default of 7 too.
That list names four Aim Response Curve choices: Standard, Linear, Precision and Aggressive. It gives no default for the curve.
Where are the aim and look sensitivity settings?
- Pause the game and select Settings.
- Switch to the Controller tab.
- Select Aim and Look Sensitivity.
- Move a single slider, jump back into the game and try it out.
We were unable to load a Rockstar support page carrying these numbers, so every figure below is taken from third-party lists.

What can you change?
| Setting | Range or choices | Default |
|---|---|---|
| Vertical Look Sensitivity | 0 to 14 | 7 |
| Horizontal Look, Horizontal Aim, Vertical Aim | values not listed | 7 (the list says 7 for all) |
| Look Acceleration, Aim Acceleration | values not listed | not listed |
| Aim Response Curve | Standard, Linear, Precision, Aggressive | not listed |
| Aim Assist Strength | 0 to 4 in the options list; 0 to 5 in two guides | 4 in the options list |
Sources don’t agree on the Aim Assist Strength range, so check where the slider starts and ends in your own build.
How should you tune it?
- Start with look sensitivity, then move on to aim sensitivity, and tune each axis on its own.
- One guide recommends keeping Look Acceleration, Aim Acceleration and the response curve untouched on your first pass.
- If the camera turns too slowly, one guide offers 9 as a value to try; drop it back down if you start sliding past targets.
- None of the sources we read describe how Precision or Aggressive feel in play, so try each curve for yourself.
Why change it
When the default feels sluggish or twitchy, gunfights and camera turns get harder to control. Adjusting in small steps stops you from overshooting, and aiming at the same target each time shows you which tweak made the difference.
Related GTA 6 guides
- GTA 6 Combat: Aiming, Takedowns, Cover and Stealth Explained
- GTA 6 Controls on PS5 and Xbox: Full Button Layout
- GTA 6 Focus Ability: How It Works in Combat
- GTA 6 Shooting Range Gold Medals: All 42 and Tips
- GTA 6 Accessibility Options: Subtitles, Colorblind, Assists
Last checked 21 November 2026. This page gets updated when new details come out.
FAQ
What is the default sensitivity in GTA 6?
7, on a scale of 0 to 14. An options list gives 7 as the default for the sensitivity sliders.
What are the Aim Response Curve options?
Standard, Linear, Precision and Aggressive. The list we read does not name a default curve.
Where do I change aim sensitivity in GTA 6?
Under Aim and Look Sensitivity, on the Controller tab in Settings.
Can I change vertical and horizontal sensitivity separately?
Yes. Both Look and Aim have their own horizontal and vertical sliders, and one guide recommends tuning each axis by itself.
What does Aim Assist Strength do?
According to one guide, it sets how much the reticle slows down while it tracks a target. Sources list the range as either 0 to 4 or 0 to 5.


















STAY ALWAYS UP TO DATE